HONEYWELL ADEMCO FIRE ALARM, ADEMCO Wall Fire Alarm pull unit for Fire Department at Valdosta Georgia City Hall Building

FIRE ALARM, ADEMCO Wall Fire Alarm pull unit for Fire Department  

at Valdosta Georgia City Hall Building, Made by Honeywell

Operation
Pulling the handle down causes the manual stations to latch in the down position and to close the normally open switch. The handle is restored manually by using the key to unlock the station and pivot the station forward for resetting the pull handle to its normal position. The crush tube is then inserted into the cavity the station assembly is then locked in the normal upright position.

Ademco's manual fire alarm stations are designed to be non-code single action devices for use in UL listed fire-alarm applications. The attractive die-cast aluminum-alloy housing meets ADA pull requirements and has been tested at Underwriter's Laboratory.
For ADA compliance, manual stations must be mounted less than 48^o above the floor for front wheelchair access and less than 54^o above the floor for side wheelchair access.